- Product id: 2773
- Stock: In Stock
- Model: QSFP-100G-CWDM4-S
on Whatsapp
Key Features
- 100Gbps optical transceiver
- Lumentum QSFP-100G-CWDM4-S
- QSFP28 form factor
- 100GBASE-CWDM4
About LUMENTUM QSFP-100G-CWDM4-S 100G Transceiver in Bangladesh
The LUMENTUM QSFP-100G-CWDM4-S is a 100Gbps CWDM4 optical transceiver designed for high-speed Ethernet connectivity over single-mode fiber. Using the QSFP28 form factor and four CWDM wavelengths, it supports optical links of up to 2km through a duplex LC interface.
The module uses four wavelengths at 1271nm, 1291nm, 1311nm and 1331nm to carry the 100GbE signal. This CWDM4 architecture allows a 100G connection to operate over a standard duplex single-mode fiber pair, making it particularly suitable for data center interconnects and enterprise network uplinks. Cisco's current 100G transceiver documentation likewise specifies the QSFP-100G-CWDM4-S as a 100GBASE-CWDM4 module with LC connectivity and 2km reach over SMF. Cisco 100G QSFP Transceiver Documentation
LUMENTUM QSFP-100G-CWDM4-S Specifications & Features
| Specification | Details |
|---|---|
| Brand | LUMENTUM |
| Part Number | QSFP-100G-CWDM4-S |
| Product Type | 100G QSFP28 Optical Transceiver |
| Data Rate | 100Gbps |
| Form Factor | QSFP28 |
| Ethernet Standard | 100GBASE-CWDM4 |
| Wavelengths | 1271nm / 1291nm / 1311nm / 1331nm |
| Fiber Type | Single-Mode Fiber (SMF) |
| Maximum Reach | Up to 2km |
| Connector | Duplex LC |
| Modulation | NRZ |
| TX Power | -6.5 to +2.5 dBm per lane |
| RX Sensitivity | Down to -11.5 dBm per lane |
| Optical Power Budget | Approximately 5dB |
| Power Consumption | Up to 3.5W |
| DOM / DDM | Yes |
| Operating Temperature | 0°C to 70°C |
| Host FEC | Required / Supported depending on host implementation |
Overview
The LUMENTUM QSFP-100G-CWDM4-S provides 100 Gigabit Ethernet connectivity for data center, enterprise and high-performance networking environments. Its CWDM4 technology multiplexes four optical wavelengths onto a duplex single-mode fiber connection.
Current specifications for the QSFP-100G-CWDM4-S class identify a 100Gbps QSFP28 module with 1271nm, 1291nm, 1311nm and 1331nm wavelengths, 2km SMF reach and duplex LC connectivity. Cisco documentation
Buy LUMENTUM QSFP-100G-CWDM4-S in Bangladesh
Purchase the LUMENTUM QSFP-100G-CWDM4-S 100G CWDM4 Optical Transceiver from Datacom Technologies (BD). We supply enterprise optical transceivers, QSFP28 modules, SFP/SFP+ optics, fiber networking products and data center connectivity solutions throughout Bangladesh.
Key Features
- 100Gbps high-speed optical connectivity
- QSFP28 form factor
- 100GBASE-CWDM4 technology
- Four CWDM wavelengths: 1271nm, 1291nm, 1311nm and 1331nm
- Up to 2km transmission distance
- Single-mode fiber support
- Duplex LC connector
- DOM/DDM monitoring
- NRZ modulation
- Up to 3.5W power consumption
- 0°C to 70°C commercial operating temperature
- Suitable for data center and enterprise networks
100GBASE-CWDM4 Connectivity
CWDM4 uses four optical wavelengths to transport four 25Gbps-class electrical lanes as a 100Gbps aggregate optical connection. The four wavelengths are multiplexed onto a duplex single-mode fiber pair, reducing the fiber count compared with parallel-fiber 100G solutions.
The QSFP-100G-CWDM4-S is therefore an effective option for 100GbE switch-to-switch, switch-to-server and data center interconnect applications where a 2km optical reach is sufficient.
Four CWDM Wavelengths
The module operates on four nominal wavelengths: 1271nm, 1291nm, 1311nm and 1331nm. Each wavelength carries one optical lane, with the lanes multiplexed internally for transmission over the duplex LC fiber connection.
Cisco's published specifications confirm these four wavelengths for the QSFP-100G-CWDM4-S. Cisco 100G CWDM4 specifications
2km Single-Mode Fiber Reach
The QSFP-100G-CWDM4-S supports link distances of up to 2km over compatible G.652 single-mode fiber. This makes it suitable for medium-distance data center and campus interconnections.
The actual achievable distance depends on fiber attenuation, connector losses, splice losses and the total optical power budget of the link.
Duplex LC Connector
The transceiver uses a duplex LC connector, with one fiber dedicated to transmit and the other to receive. This allows the module to work with standard duplex single-mode fiber infrastructure.
Digital Optical Monitoring
DOM/DDM functionality allows compatible host equipment to monitor optical module operating conditions. Depending on the host platform, monitored parameters can include temperature, supply voltage, laser bias and transmit/receive optical power.
Compatible QSFP-100G-CWDM4-S references specify DOM/DDM support. CWDM4 QSFP28 technical reference
Optical Performance
Published specifications for the QSFP-100G-CWDM4-S class specify transmitter power from approximately -6.5dBm to +2.5dBm per lane and receiver sensitivity down to approximately -11.5dBm. The corresponding optical power budget is approximately 5dB. Cisco technical specifications
Optical-budget calculations should account for fiber attenuation, patch panels, connectors and other passive losses before deploying a 2km link.
3.5W Low-Power QSFP28 Design
The module is specified for power consumption of up to approximately 3.5W. This makes it suitable for high-density 100G switch and data center deployments where power and thermal efficiency are important considerations.
Enterprise & Data Center Applications
- 100GbE switch-to-switch connections
- Data center interconnects
- Enterprise network uplinks
- Core network connectivity
- High-performance computing networks
- Cloud infrastructure
- Server and storage network uplinks
- Campus network interconnection
- Leaf-and-spine architectures
- Data center aggregation
100G CWDM4 vs 100G SR4
| Feature | 100G CWDM4 | 100G SR4 |
|---|---|---|
| Form Factor | QSFP28 | QSFP28 |
| Fiber | Single-Mode Fiber | Multimode Fiber |
| Typical Reach | Up to 2km | Short-range, typically up to 100m over OM4 |
| Wavelength | 1271 / 1291 / 1311 / 1331nm | 850nm class |
| Connector | Duplex LC | MPO/MTP |
| Primary Use | Medium-distance DCI and enterprise links | Short data center links |
CWDM4 is particularly useful when an existing single-mode fiber infrastructure must support 100GbE over distances beyond typical multimode SR4 applications.
Compatibility
The QSFP-100G-CWDM4-S is a specific transceiver designation, and compatibility depends on the host switch, router, NIC or optical platform. Vendor coding and firmware requirements can vary even when two modules conform to the same optical standard.
Before ordering, verify that the target equipment supports the Lumentum-coded QSFP-100G-CWDM4-S or the appropriate vendor-compatible variant.
Installation Considerations
- Use compatible duplex single-mode fiber.
- Use clean LC connectors.
- Verify the host supports 100G QSFP28 CWDM4 optics.
- Check host FEC requirements.
- Verify the optical power budget for the complete link.
- Confirm vendor coding requirements.
- Check DOM/DDM support on the host if optical monitoring is required.
- Do not exceed the receiver's maximum optical input power.
Benefits
- 100Gbps high-speed networking
- 2km single-mode fiber reach
- Four-wavelength CWDM4 architecture
- Duplex LC connectivity
- QSFP28 high-density form factor
- DOM/DDM monitoring
- Low power consumption
- Suitable for data center interconnects
- Suitable for enterprise 100GbE uplinks
- Suitable for cloud and HPC infrastructure
Why Buy from Datacom Technologies (BD)?
Datacom Technologies (BD) supplies enterprise optical networking products in Bangladesh, including Lumentum-compatible transceivers, QSFP28 modules, SFP/SFP+ optics, fiber networking components, switches and data center connectivity solutions. Customers can receive competitive pricing, technical consultation, deployment assistance and nationwide delivery.
- Call/WhatsApp: +8801748173213
- Email: sales@datacom.com.bd
- Alternative Email: datacomtechnologiesbd@gmail.com
- Office: Tropical Center, 218, Dr. Kudroti Khuda Road, New Elephant Road, Dhaka-1205, Bangladesh
Frequently Asked Questions (FAQ)
Q1: What is the LUMENTUM QSFP-100G-CWDM4-S?
It is a 100Gbps QSFP28 optical transceiver using 100GBASE-CWDM4 technology for up to 2km over single-mode fiber.
Q2: What is the data rate?
The module provides a 100Gbps aggregate optical data rate.
Q3: What wavelengths does it use?
It uses 1271nm, 1291nm, 1311nm and 1331nm CWDM wavelengths.
Q4: What is the maximum distance?
The specified reach is up to 2km over compatible single-mode fiber.
Q5: What type of fiber is required?
The module is designed for single-mode fiber, typically G.652-compatible fiber for CWDM4 applications.
Q6: What connector does it use?
It uses a duplex LC optical connector.
Q7: Does it support DOM/DDM?
Yes. The QSFP-100G-CWDM4-S class supports digital optical monitoring.
Q8: How much power does it consume?
Published specifications specify a maximum power consumption of approximately 3.5W.
Q9: What is the operating temperature?
The commercial-temperature version operates from 0°C to 70°C.
Q10: Is CWDM4 the same as 100G SR4?
No. CWDM4 uses four wavelengths over duplex SMF and reaches up to 2km, while SR4 is a short-range multimode solution using parallel fibers and an MPO/MTP interface.
Q11: Is FEC required?
Host FEC requirements depend on the equipment and implementation. Verify the target switch/router documentation before deployment.
Q12: Where can I buy the LUMENTUM QSFP-100G-CWDM4-S in Bangladesh?
You can contact Datacom Technologies (BD) for Lumentum-compatible 100G CWDM4 QSFP28 transceivers, enterprise optical modules and data center networking solutions with nationwide delivery.
Questions
Have question about this product? Get specific details about this product from expert.No questions have been asked about this product.
What is the price of LUMENTUM QSFP-100G-CWDM4-S 100G Transceiver in Bangladesh 2026?
The latest price of LUMENTUM QSFP-100G-CWDM4-S 100G Transceiver in Bangladesh is available on request. Product prices may vary depending on brand, model, specification, stock availability, warranty, and current market condition. Please call or WhatsApp Datacom Technologies (BD) to get the updated price, availability, and official quotation.
You can buy original LUMENTUM QSFP-100G-CWDM4-S 100G Transceiver in Bangladesh from Datacom Technologies (BD) with expert guidance, genuine product assurance, and after-sales support. For the best deal, current stock status, and product recommendation, contact our sales team today.